SELECT A CATEGORY
Supermarket Turnstile

Supermarket Turnstile (0)

Outside Housing Material

304 Stainless Steel

Communication Interface

RS485 communication,

Less than 1200M

Dimension

1200*168*980(mm)

Relative Humidity

Less than 90%, non-condensing

Arm Length

510mm - 830mm

Input Interface

12V level signal or 12Vpulse signal with a pluswidth>100ms, driving current>10mA

Working Volt

AC220 ±10%V / 50 ±10% HZ

Working Temperture

-10℃ ~ 50℃

Gate Opening and Closing Time

1-2 seconds

Drive Motor

DC Brushed Motor (24V)

Passing Speed

40 persons/min

Application Range

Metro, School, Office, Scenic, Gym, Factory,Residential, Supermarket

Product Introduction

The intelligent Swing turnstiles is one of the serial products of intelligent passage management series from Our Company.

It possesses superiority incomparable with the traditional management mode. The outline of the product is formed after pressing the stainless steel plate. The shape is featured as a pleasing appearance, a good looking, stainless and durable. The system is provided with a standard electric interface and is easily integrated into the product with read/write facilities.

A special control system is equipped in the product to meet the requirement of fire control, so that the smooth passage flow is ensured, realizing a timely diverting of passengers. The product is featured as stable in performance, safe and reliable, and can be used widely in the places where passenger flow is great and monitoring is needed such as stations, harbors and guest house.

Functions and features

1. Problem-self-checking function.

2. Many options of workingways: Bi-direction card reading: One directioncard and another no reading; One direction card reading and another freely. And single direction photocell controlled passing and close.Working ways can be set in the control panel.

3. When power off, arm open automaticallyand power on again, armwill be held automatically.

4. When valid card read and passenger passed, arm can be delayedtoclose from 1-60s which can be set in the control panel.

5. Auto-reposition function: After card read, passenger not pass withinregulated time period, full-heightturnstile will cancel this passing right. And the regulated time period for passing can be set by managers.

6. If passenger pass without card read or valid card read, flap barrierwillalarm until passenger get back from the flap barrier and then take a valid card to be read for passing.

7. Swing barrier is with 485 interface forlog-distance control concern.

8. Ant-rush function:If there is no open single, arm will be holding tightly.

9. Double anti-clipping function: Photocell anti-dipping and mechanicalanti-dipping. When passenger is going throughthe flap barrier, photocell will detect out this situation and will not close. After passenger passed, arm will close automatically During its reposition, if arm meets any obstacle,am will get back automatically or stop working for awhile with very slight force. Also it will alarm.